• +91 20 25291673

EMS Activity

Cermet is now association with Orbittal Group,Thereby enhancing the business with flagship of Orbittal.

Cermet microeletronics is an electronic manufacturing company , but not limited to EMS provider.
We are focussing on power electronics solution. Our operating model is to take care of the total product life cycle.

We have advanced infrastructure dedicated to this activity.

Product line
1.BLDC CONTROLLER
Brushless DC Drives were designed for high volume OEM applications. Choose from 0-5 VDC/0-12VDC input control or by a simple turn of a potentiometer, it's doesn't get any easier than that. keeping a low unit cost as the primary objective.
Power : 40W to 700W
Voltage : 24VDC to 40VDC
Sizes : Different as per wattage

2.AUTOMATIC VOLTAGE REGULATOR
Specification :-

  •  Input Nominal Voltage :-  230Vac.
  •  Input Operating Voltage :- 150 Vac to 270 Vac .
  •  Input Frequency Range :- 47 to 53 Hz.
  •  Output Line & Load Regulation :-  +/- 10%.
  •  Voltage Correction Time :-  60Vac/sec.
  •  Operating Temperature Range:-  0  ̊C to 55  ̊C
  •  Humidity:- 95% RH at 55  ̊C
  •  Storage Temperature Range :-  10  ̊C to 77  ̊C
  • Convectional Cooling
  • Dimension as per KVA

Protection :-

  •  Input Low Cutoff/Input High Cutoff.
  •  Input Frequency :- 50 Hz.
  •  Output Overload.
  •  Output Short Circuit.
  •  Indication
  •  Output Over Voltage.
  •  Mains ON.
 

 

SOLAR CHARGE CONTROLLER

 

  • Input Voltage(Vmax) - 12VDc.
  • Current - 5Amp/10Amp.
  • Control System  - Low Loss PWM type
  • MPPT(Maximum Power Point Tracking).
  • Low Battery Cut-off - 10.7VDc.
  • High Battery Cut-off - 14.4VDc.
  • Low Voltage Reconnect - 12.7VDc.
  • High Voltage Reconnect - 14.35VDc.
  • Protection
  1. Short Circuit &over load
  2. Over Current From Panel
  3. Reverse Polarity Of Batt. & Panel
  4. Reverse Current Flow Batt.& Panel
  5. Lightening Protection in Circuit
  • Application - In door Use Only

Up to 100W LED Drivers with APFC

 

  •     Universal AC input 96 – 265 V AC.
  •     Built in APFC function.
  •     High efficiency >85%.
  •     Protection : Short circuit / over current / over
  •     voltage / over temperature
  •     Cooling by free air convection.
  •     IPS2 dry/damp location.
  •     Suitable for LED & street lighting applications.
  •     Cv, Cc type.
  •     Compliance to safety regulations for lighting.
  •     THD < 25.
  •     MTBF Calculation : up to > 20,000 Hours Lifetime.
  •     It can be developed as per requirement.
  • Sr.No. 83, Mauje Shivane, Near Warje Malwadi, Pune - 411023
  • +91 20 25291673
  • +91 20 25292910
  • This email address is being protected from spambots. You need JavaScript enabled to view it.

Corporate Video

Send Us Enquiry

  Mail is not sent.   Your email has been sent.